vault backup: 2025-10-30 20:43:51
This commit is contained in:
parent
e348de73e7
commit
d36a9e7d72
File diff suppressed because it is too large
Load Diff
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
|
@ -0,0 +1,442 @@
|
|||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
|
||||
Device Model: TOSHIBA MG07ACA14TE
|
||||
Serial Number: Y1W0A00WF94G
|
||||
LU WWN Device Id: 5 000039 b48d8a112
|
||||
Firmware Version: 0104
|
||||
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 3.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Oct 26 17:09:56 2025 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x84) Offline data collection activity
|
||||
was suspended by an interrupting command from host.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 113) The previous self-test completed having
|
||||
the read element of the test failed.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: (1345) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 085 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 7753
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 34
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 039 039 000 - 24536
|
||||
10 Spin_Retry_Count PO--CK 100 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 32
|
||||
23 Helium_Condition_Lower PO---K 100 100 075 - 0
|
||||
24 Helium_Condition_Upper PO---K 100 100 075 - 0
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 13
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 35
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 17/41)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 328
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 63
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
220 Disk_Shift -O---- 100 100 000 - 117440515
|
||||
222 Loaded_Hours -O--CK 040 040 000 - 24358
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 596
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x08 GPL R/O 2 Power Conditions log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0c GPL R/O 513 Pending Defects log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 53248 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 53248 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 10
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 10 [9] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 90 00 00 26 11 b7 b0 40 00 Error: WP at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 b8 00 03 d3 97 4c 08 40 00 22d+23:10:46.405 WRITE FPDMA QUEUED
|
||||
61 00 08 00 b0 00 00 27 c6 5c b0 40 00 22d+23:10:46.405 WRITE FPDMA QUEUED
|
||||
60 08 00 00 a8 00 00 83 1b 22 58 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
||||
60 08 00 00 a0 00 00 83 1b 1a 58 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
||||
60 00 08 00 98 00 02 7e a7 e6 c0 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
||||
|
||||
Error 9 [8] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was in standby mode.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 38 00 00 26 11 b7 b0 40 00 Error: WP at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 78 00 00 27 c6 5c b0 40 00 22d+23:10:46.316 WRITE FPDMA QUEUED
|
||||
60 08 00 00 70 00 00 83 1b 22 58 40 00 22d+23:10:43.020 READ FPDMA QUEUED
|
||||
60 08 00 00 68 00 00 83 1b 1a 58 40 00 22d+23:10:43.016 READ FPDMA QUEUED
|
||||
60 01 00 00 60 00 00 26 12 c7 98 40 00 22d+23:10:43.014 READ FPDMA QUEUED
|
||||
60 00 08 00 58 00 02 7e a7 e6 c0 40 00 22d+23:10:42.653 READ FPDMA QUEUED
|
||||
|
||||
Error 8 [7] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was in standby mode.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 e8 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 20 00 00 26 12 ae 98 40 00 22d+23:10:42.565 READ FPDMA QUEUED
|
||||
60 01 00 00 18 00 00 26 12 61 98 40 00 22d+23:10:38.639 READ FPDMA QUEUED
|
||||
60 01 00 00 10 00 00 26 12 4a 98 40 00 22d+23:10:38.635 READ FPDMA QUEUED
|
||||
60 01 00 00 08 00 00 26 12 17 98 40 00 22d+23:10:38.237 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 26 11 e5 98 40 00 22d+23:10:38.237 READ FPDMA QUEUED
|
||||
|
||||
Error 7 [6] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 50 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 d0 00 00 26 12 17 98 40 00 22d+23:10:34.650 READ FPDMA QUEUED
|
||||
60 01 00 00 c8 00 00 26 11 e5 98 40 00 22d+23:10:34.645 READ FPDMA QUEUED
|
||||
61 00 08 00 c0 00 00 27 c6 5c a8 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
||||
61 00 b8 00 b8 00 00 00 0f 09 90 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
||||
61 00 10 00 b0 00 03 d3 97 4b f8 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
||||
|
||||
Error 6 [5] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was in standby mode.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 c8 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 d8 00 00 12 d1 66 d0 40 00 22d+23:10:34.081 READ FPDMA QUEUED
|
||||
60 01 00 00 d0 00 00 26 11 cd 98 40 00 22d+23:10:30.949 READ FPDMA QUEUED
|
||||
60 01 00 00 c8 00 00 26 11 b7 98 40 00 22d+23:10:30.947 READ FPDMA QUEUED
|
||||
60 01 00 00 c0 00 00 26 11 a1 98 40 00 22d+23:10:30.944 READ FPDMA QUEUED
|
||||
60 01 00 00 b8 00 00 26 11 89 98 40 00 22d+23:10:30.939 READ FPDMA QUEUED
|
||||
|
||||
Error 5 [4] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 98 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 08 00 00 a8 00 00 04 01 d0 40 40 00 01:08:46.454 READ FPDMA QUEUED
|
||||
60 07 f0 00 a0 00 00 04 01 c8 50 40 00 01:08:46.454 READ FPDMA QUEUED
|
||||
60 08 00 00 98 00 00 04 01 c0 50 40 00 01:08:46.454 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:46.453 READ LOG EXT
|
||||
60 08 00 00 88 00 00 04 01 d0 40 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
|
||||
Error 4 [3] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 78 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 08 00 00 88 00 00 04 01 d0 40 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
60 07 f0 00 80 00 00 04 01 c8 50 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
60 08 00 00 78 00 00 04 01 c0 50 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:43.744 READ LOG EXT
|
||||
60 08 00 00 68 00 00 04 01 d0 40 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 58 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 08 00 00 68 00 00 04 01 d0 40 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
60 07 f0 00 60 00 00 04 01 c8 50 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
60 08 00 00 58 00 00 04 01 c0 50 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:40.910 READ LOG EXT
|
||||
60 08 00 00 48 00 00 04 01 d0 40 40 00 01:08:38.196 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed: read failure 10% 24231 1189368
|
||||
# 2 Extended offline Interrupted (host reset) 90% 24 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: SMART Off-line Data Collection executing in background (4)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 20/35 Celsius
|
||||
Lifetime Min/Max Temperature: 17/41 Celsius
|
||||
Specified Max Operating Temperature: 55 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 478 (36)
|
||||
|
||||
Index Estimated Time Temperature Celsius
|
||||
37 2025-10-26 09:12 33 **************
|
||||
... ..( 34 skipped). .. **************
|
||||
72 2025-10-26 09:47 33 **************
|
||||
73 2025-10-26 09:48 32 *************
|
||||
... ..(141 skipped). .. *************
|
||||
215 2025-10-26 12:10 32 *************
|
||||
216 2025-10-26 12:11 31 ************
|
||||
217 2025-10-26 12:12 32 *************
|
||||
218 2025-10-26 12:13 31 ************
|
||||
219 2025-10-26 12:14 31 ************
|
||||
220 2025-10-26 12:15 31 ************
|
||||
221 2025-10-26 12:16 32 *************
|
||||
222 2025-10-26 12:17 32 *************
|
||||
223 2025-10-26 12:18 31 ************
|
||||
224 2025-10-26 12:19 32 *************
|
||||
225 2025-10-26 12:20 31 ************
|
||||
226 2025-10-26 12:21 32 *************
|
||||
227 2025-10-26 12:22 31 ************
|
||||
... ..( 2 skipped). .. ************
|
||||
230 2025-10-26 12:25 31 ************
|
||||
231 2025-10-26 12:26 32 *************
|
||||
232 2025-10-26 12:27 31 ************
|
||||
233 2025-10-26 12:28 32 *************
|
||||
... ..(250 skipped). .. *************
|
||||
6 2025-10-26 16:39 32 *************
|
||||
7 2025-10-26 16:40 33 **************
|
||||
... ..( 25 skipped). .. **************
|
||||
33 2025-10-26 17:06 33 **************
|
||||
34 2025-10-26 17:07 34 ***************
|
||||
35 2025-10-26 17:08 33 **************
|
||||
36 2025-10-26 17:09 33 **************
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 3) ==
|
||||
0x01 0x008 4 32 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 24536 --- Power-on Hours
|
||||
0x01 0x018 6 97186723072 --- Logical Sectors Written
|
||||
0x01 0x020 6 1699162430 --- Number of Write Commands
|
||||
0x01 0x028 6 828309603057 --- Logical Sectors Read
|
||||
0x01 0x030 6 1176857596 --- Number of Read Commands
|
||||
0x01 0x038 6 88329600000 --- Date and Time TimeStamp
|
||||
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
||||
0x02 0x010 4 0 --- Overlimit Shock Events
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 498 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 497 --- Head Flying Hours
|
||||
0x03 0x018 4 35 --- Head Load Events
|
||||
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 9784 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x03 0x038 4 328 --- Number of Realloc. Candidate Logical Sectors
|
||||
0x03 0x040 4 13 --- Number of High Priority Unload Events
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 31 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 31 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 41 --- Highest Temperature
|
||||
0x05 0x028 1 17 --- Lowest Temperature
|
||||
0x05 0x030 1 38 N-- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 20 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 35 N-- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 26 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 106 --- Number of Hardware Resets
|
||||
0x06 0x010 4 37 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c)
|
||||
Index LBA Hours
|
||||
0 770333432 24162
|
||||
1 770333433 24162
|
||||
2 770333434 24162
|
||||
3 770333435 24162
|
||||
4 770333436 24162
|
||||
5 770333437 24162
|
||||
6 770333438 24162
|
||||
7 770333439 24162
|
||||
8 770517336 24162
|
||||
9 770517337 24162
|
||||
10 770517338 24162
|
||||
11 770517339 24162
|
||||
12 770517340 24162
|
||||
13 770517341 24162
|
||||
14 770517342 24162
|
||||
15 770517343 24162
|
||||
16 802909400 24162
|
||||
17 802909401 24162
|
||||
18 802909402 24162
|
||||
19 802909403 24162
|
||||
20 802909404 24162
|
||||
21 802909405 24162
|
||||
22 802909406 24162
|
||||
23 802909407 24162
|
||||
24 802909408 24458
|
||||
25 802909409 24458
|
||||
26 802909410 24458
|
||||
27 802909411 24458
|
||||
28 802909412 24458
|
||||
29 802909413 24458
|
||||
30 802909414 24458
|
||||
... (297 entries not shown)
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
|
@ -0,0 +1,245 @@
|
|||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
|
||||
Device Model: TOSHIBA MG07ACA14TE
|
||||
Serial Number: Y1W0A00XF94G
|
||||
LU WWN Device Id: 5 000039 b48d8a115
|
||||
Firmware Version: 0104
|
||||
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 3.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Oct 26 17:09:51 2025 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: (1314) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 7933
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 39
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 039 039 000 - 24536
|
||||
10 Spin_Retry_Count PO--CK 100 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 38
|
||||
23 Helium_Condition_Lower PO---K 100 100 075 - 0
|
||||
24 Helium_Condition_Upper PO---K 100 100 075 - 0
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 18
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 41
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 17/42)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
220 Disk_Shift -O---- 100 100 000 - 218628097
|
||||
222 Loaded_Hours -O--CK 040 040 000 - 24358
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 592
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x08 GPL R/O 2 Power Conditions log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0c GPL R/O 513 Pending Defects log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 53248 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 53248 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 24218 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 35 Celsius
|
||||
Power Cycle Min/Max Temperature: 20/36 Celsius
|
||||
Lifetime Min/Max Temperature: 17/42 Celsius
|
||||
Specified Max Operating Temperature: 55 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 478 (84)
|
||||
|
||||
Index Estimated Time Temperature Celsius
|
||||
85 2025-10-26 09:12 34 ***************
|
||||
... ..( 23 skipped). .. ***************
|
||||
109 2025-10-26 09:36 34 ***************
|
||||
110 2025-10-26 09:37 33 **************
|
||||
111 2025-10-26 09:38 33 **************
|
||||
112 2025-10-26 09:39 33 **************
|
||||
113 2025-10-26 09:40 34 ***************
|
||||
114 2025-10-26 09:41 33 **************
|
||||
... ..(420 skipped). .. **************
|
||||
57 2025-10-26 16:42 33 **************
|
||||
58 2025-10-26 16:43 34 ***************
|
||||
... ..( 22 skipped). .. ***************
|
||||
81 2025-10-26 17:06 34 ***************
|
||||
82 2025-10-26 17:07 35 ****************
|
||||
83 2025-10-26 17:08 35 ****************
|
||||
84 2025-10-26 17:09 35 ****************
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 3) ==
|
||||
0x01 0x008 4 38 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 24536 --- Power-on Hours
|
||||
0x01 0x018 6 97196951616 --- Logical Sectors Written
|
||||
0x01 0x020 6 1681538024 --- Number of Write Commands
|
||||
0x01 0x028 6 829179218739 --- Logical Sectors Read
|
||||
0x01 0x030 6 1230611480 --- Number of Read Commands
|
||||
0x01 0x038 6 88329600000 --- Date and Time TimeStamp
|
||||
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
||||
0x02 0x010 4 1 --- Overlimit Shock Events
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 498 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 497 --- Head Flying Hours
|
||||
0x03 0x018 4 41 --- Head Load Events
|
||||
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 64 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
|
||||
0x03 0x040 4 18 --- Number of High Priority Unload Events
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 35 --- Current Temperature
|
||||
0x05 0x010 1 33 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 32 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 42 --- Highest Temperature
|
||||
0x05 0x028 1 17 --- Lowest Temperature
|
||||
0x05 0x030 1 39 N-- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 21 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 36 N-- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 28 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 112 --- Number of Hardware Resets
|
||||
0x06 0x010 4 37 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c)
|
||||
No Defects Logged
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
|
@ -0,0 +1,423 @@
|
|||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
|
||||
Device Model: TOSHIBA MG07ACA14TE
|
||||
Serial Number: Y1W0A00WF94G
|
||||
LU WWN Device Id: 5 000039 b48d8a112
|
||||
Firmware Version: 0104
|
||||
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 3.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Sep 13 07:14:43 2025 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x84) Offline data collection activity
|
||||
was suspended by an interrupting command from host.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 41) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: (1345) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 085 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 2597
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 33
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 042 042 000 - 23528
|
||||
10 Spin_Retry_Count PO--CK 100 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 31
|
||||
23 Helium_Condition_Lower PO---K 100 100 075 - 0
|
||||
24 Helium_Condition_Upper PO---K 100 100 075 - 0
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 13
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 34
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 17/41)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 24
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 70
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
220 Disk_Shift -O---- 100 100 000 - 34996226
|
||||
222 Loaded_Hours -O--CK 042 042 000 - 23350
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 597
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x08 GPL R/O 2 Power Conditions log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0c GPL R/O 513 Pending Defects log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 53248 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 53248 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 10
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 10 [9] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 90 00 00 26 11 b7 b0 40 00 Error: WP at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 b8 00 03 d3 97 4c 08 40 00 22d+23:10:46.405 WRITE FPDMA QUEUED
|
||||
61 00 08 00 b0 00 00 27 c6 5c b0 40 00 22d+23:10:46.405 WRITE FPDMA QUEUED
|
||||
60 08 00 00 a8 00 00 83 1b 22 58 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
||||
60 08 00 00 a0 00 00 83 1b 1a 58 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
||||
60 00 08 00 98 00 02 7e a7 e6 c0 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
||||
|
||||
Error 9 [8] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was in standby mode.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 38 00 00 26 11 b7 b0 40 00 Error: WP at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 78 00 00 27 c6 5c b0 40 00 22d+23:10:46.316 WRITE FPDMA QUEUED
|
||||
60 08 00 00 70 00 00 83 1b 22 58 40 00 22d+23:10:43.020 READ FPDMA QUEUED
|
||||
60 08 00 00 68 00 00 83 1b 1a 58 40 00 22d+23:10:43.016 READ FPDMA QUEUED
|
||||
60 01 00 00 60 00 00 26 12 c7 98 40 00 22d+23:10:43.014 READ FPDMA QUEUED
|
||||
60 00 08 00 58 00 02 7e a7 e6 c0 40 00 22d+23:10:42.653 READ FPDMA QUEUED
|
||||
|
||||
Error 8 [7] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was in standby mode.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 e8 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 20 00 00 26 12 ae 98 40 00 22d+23:10:42.565 READ FPDMA QUEUED
|
||||
60 01 00 00 18 00 00 26 12 61 98 40 00 22d+23:10:38.639 READ FPDMA QUEUED
|
||||
60 01 00 00 10 00 00 26 12 4a 98 40 00 22d+23:10:38.635 READ FPDMA QUEUED
|
||||
60 01 00 00 08 00 00 26 12 17 98 40 00 22d+23:10:38.237 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 26 11 e5 98 40 00 22d+23:10:38.237 READ FPDMA QUEUED
|
||||
|
||||
Error 7 [6] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 50 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 d0 00 00 26 12 17 98 40 00 22d+23:10:34.650 READ FPDMA QUEUED
|
||||
60 01 00 00 c8 00 00 26 11 e5 98 40 00 22d+23:10:34.645 READ FPDMA QUEUED
|
||||
61 00 08 00 c0 00 00 27 c6 5c a8 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
||||
61 00 b8 00 b8 00 00 00 0f 09 90 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
||||
61 00 10 00 b0 00 03 d3 97 4b f8 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
||||
|
||||
Error 6 [5] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was in standby mode.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 c8 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 d8 00 00 12 d1 66 d0 40 00 22d+23:10:34.081 READ FPDMA QUEUED
|
||||
60 01 00 00 d0 00 00 26 11 cd 98 40 00 22d+23:10:30.949 READ FPDMA QUEUED
|
||||
60 01 00 00 c8 00 00 26 11 b7 98 40 00 22d+23:10:30.947 READ FPDMA QUEUED
|
||||
60 01 00 00 c0 00 00 26 11 a1 98 40 00 22d+23:10:30.944 READ FPDMA QUEUED
|
||||
60 01 00 00 b8 00 00 26 11 89 98 40 00 22d+23:10:30.939 READ FPDMA QUEUED
|
||||
|
||||
Error 5 [4] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 98 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 08 00 00 a8 00 00 04 01 d0 40 40 00 01:08:46.454 READ FPDMA QUEUED
|
||||
60 07 f0 00 a0 00 00 04 01 c8 50 40 00 01:08:46.454 READ FPDMA QUEUED
|
||||
60 08 00 00 98 00 00 04 01 c0 50 40 00 01:08:46.454 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:46.453 READ LOG EXT
|
||||
60 08 00 00 88 00 00 04 01 d0 40 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
|
||||
Error 4 [3] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 78 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 08 00 00 88 00 00 04 01 d0 40 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
60 07 f0 00 80 00 00 04 01 c8 50 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
60 08 00 00 78 00 00 04 01 c0 50 40 00 01:08:43.745 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:43.744 READ LOG EXT
|
||||
60 08 00 00 68 00 00 04 01 d0 40 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 58 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 08 00 00 68 00 00 04 01 d0 40 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
60 07 f0 00 60 00 00 04 01 c8 50 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
60 08 00 00 58 00 00 04 01 c0 50 40 00 01:08:40.910 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:40.910 READ LOG EXT
|
||||
60 08 00 00 48 00 00 04 01 d0 40 40 00 01:08:38.196 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Interrupted (host reset) 90% 24 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: SMART Off-line Data Collection executing in background (4)
|
||||
Current Temperature: 32 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/41 Celsius
|
||||
Lifetime Min/Max Temperature: 17/41 Celsius
|
||||
Specified Max Operating Temperature: 55 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 478 (247)
|
||||
|
||||
Index Estimated Time Temperature Celsius
|
||||
248 2025-09-12 23:17 33 **************
|
||||
... ..(223 skipped). .. **************
|
||||
472 2025-09-13 03:01 33 **************
|
||||
473 2025-09-13 03:02 34 ***************
|
||||
... ..( 3 skipped). .. ***************
|
||||
477 2025-09-13 03:06 34 ***************
|
||||
0 2025-09-13 03:07 33 **************
|
||||
... ..( 67 skipped). .. **************
|
||||
68 2025-09-13 04:15 33 **************
|
||||
69 2025-09-13 04:16 34 ***************
|
||||
... ..( 2 skipped). .. ***************
|
||||
72 2025-09-13 04:19 34 ***************
|
||||
73 2025-09-13 04:20 33 **************
|
||||
... ..(133 skipped). .. **************
|
||||
207 2025-09-13 06:34 33 **************
|
||||
208 2025-09-13 06:35 32 *************
|
||||
209 2025-09-13 06:36 33 **************
|
||||
210 2025-09-13 06:37 33 **************
|
||||
211 2025-09-13 06:38 32 *************
|
||||
... ..( 35 skipped). .. *************
|
||||
247 2025-09-13 07:14 32 *************
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 3) ==
|
||||
0x01 0x008 4 31 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 23528 --- Power-on Hours
|
||||
0x01 0x018 6 92904137520 --- Logical Sectors Written
|
||||
0x01 0x020 6 1640237235 --- Number of Write Commands
|
||||
0x01 0x028 6 800831153563 --- Logical Sectors Read
|
||||
0x01 0x030 6 1111946920 --- Number of Read Commands
|
||||
0x01 0x038 6 84700800000 --- Date and Time TimeStamp
|
||||
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
||||
0x02 0x010 4 0 --- Overlimit Shock Events
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 683 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 682 --- Head Flying Hours
|
||||
0x03 0x018 4 34 --- Head Load Events
|
||||
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 8753 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x03 0x038 4 24 --- Number of Realloc. Candidate Logical Sectors
|
||||
0x03 0x040 4 13 --- Number of High Priority Unload Events
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 32 --- Current Temperature
|
||||
0x05 0x010 1 33 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 34 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 41 --- Highest Temperature
|
||||
0x05 0x028 1 17 --- Lowest Temperature
|
||||
0x05 0x030 1 38 N-- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 20 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 35 N-- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 26 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 103 --- Number of Hardware Resets
|
||||
0x06 0x010 4 36 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c)
|
||||
Index LBA Hours
|
||||
0 2034974368 19540
|
||||
1 2034974369 19540
|
||||
2 2034974370 19540
|
||||
3 2034974371 19540
|
||||
4 2034974372 19540
|
||||
5 2034974373 19540
|
||||
6 2034974374 19540
|
||||
7 2034974375 19540
|
||||
8 2034974376 20851
|
||||
9 2034974377 20851
|
||||
10 2034974378 20851
|
||||
11 2034974379 20851
|
||||
12 2034974380 20851
|
||||
13 2034974381 20851
|
||||
14 2034974382 20851
|
||||
15 2034974383 20851
|
||||
16 2744940432 16615
|
||||
17 2744940433 16615
|
||||
18 2744940434 16615
|
||||
19 2744940435 16615
|
||||
20 2744940436 16615
|
||||
21 2744940437 16615
|
||||
22 2744940438 16615
|
||||
23 2744940439 16615
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
|
@ -0,0 +1,298 @@
|
|||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
|
||||
Device Model: TOSHIBA MG07ACA14TE
|
||||
Serial Number: Y1W0A00XF94G
|
||||
LU WWN Device Id: 5 000039 b48d8a115
|
||||
Firmware Version: 0104
|
||||
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 3.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Sep 13 07:14:38 2025 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: (1314) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 2595
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 38
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 042 042 000 - 23528
|
||||
10 Spin_Retry_Count PO--CK 100 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 37
|
||||
23 Helium_Condition_Lower PO---K 100 100 075 - 0
|
||||
24 Helium_Condition_Upper PO---K 100 100 075 - 0
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 18
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 40
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 17/42)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
220 Disk_Shift -O---- 100 100 000 - 2228225
|
||||
222 Loaded_Hours -O--CK 042 042 000 - 23350
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 595
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x08 GPL R/O 2 Power Conditions log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0c GPL R/O 513 Pending Defects log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 53248 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 53248 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/42 Celsius
|
||||
Lifetime Min/Max Temperature: 17/42 Celsius
|
||||
Specified Max Operating Temperature: 55 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 478 (295)
|
||||
|
||||
Index Estimated Time Temperature Celsius
|
||||
296 2025-09-12 23:17 33 **************
|
||||
... ..( 4 skipped). .. **************
|
||||
301 2025-09-12 23:22 33 **************
|
||||
302 2025-09-12 23:23 34 ***************
|
||||
303 2025-09-12 23:24 33 **************
|
||||
304 2025-09-12 23:25 34 ***************
|
||||
305 2025-09-12 23:26 34 ***************
|
||||
306 2025-09-12 23:27 33 **************
|
||||
307 2025-09-12 23:28 34 ***************
|
||||
... ..( 2 skipped). .. ***************
|
||||
310 2025-09-12 23:31 34 ***************
|
||||
311 2025-09-12 23:32 33 **************
|
||||
312 2025-09-12 23:33 33 **************
|
||||
313 2025-09-12 23:34 34 ***************
|
||||
... ..( 2 skipped). .. ***************
|
||||
316 2025-09-12 23:37 34 ***************
|
||||
317 2025-09-12 23:38 33 **************
|
||||
... ..( 71 skipped). .. **************
|
||||
389 2025-09-13 00:50 33 **************
|
||||
390 2025-09-13 00:51 34 ***************
|
||||
... ..( 71 skipped). .. ***************
|
||||
462 2025-09-13 02:03 34 ***************
|
||||
463 2025-09-13 02:04 33 **************
|
||||
464 2025-09-13 02:05 34 ***************
|
||||
465 2025-09-13 02:06 33 **************
|
||||
... ..( 35 skipped). .. **************
|
||||
23 2025-09-13 02:42 33 **************
|
||||
24 2025-09-13 02:43 34 ***************
|
||||
25 2025-09-13 02:44 33 **************
|
||||
... ..( 2 skipped). .. **************
|
||||
28 2025-09-13 02:47 33 **************
|
||||
29 2025-09-13 02:48 34 ***************
|
||||
30 2025-09-13 02:49 33 **************
|
||||
... ..( 9 skipped). .. **************
|
||||
40 2025-09-13 02:59 33 **************
|
||||
41 2025-09-13 03:00 34 ***************
|
||||
... ..( 61 skipped). .. ***************
|
||||
103 2025-09-13 04:02 34 ***************
|
||||
104 2025-09-13 04:03 33 **************
|
||||
105 2025-09-13 04:04 34 ***************
|
||||
... ..( 5 skipped). .. ***************
|
||||
111 2025-09-13 04:10 34 ***************
|
||||
112 2025-09-13 04:11 33 **************
|
||||
113 2025-09-13 04:12 34 ***************
|
||||
... ..( 81 skipped). .. ***************
|
||||
195 2025-09-13 05:34 34 ***************
|
||||
196 2025-09-13 05:35 33 **************
|
||||
197 2025-09-13 05:36 34 ***************
|
||||
198 2025-09-13 05:37 34 ***************
|
||||
199 2025-09-13 05:38 33 **************
|
||||
200 2025-09-13 05:39 34 ***************
|
||||
... ..( 43 skipped). .. ***************
|
||||
244 2025-09-13 06:23 34 ***************
|
||||
245 2025-09-13 06:24 33 **************
|
||||
... ..( 24 skipped). .. **************
|
||||
270 2025-09-13 06:49 33 **************
|
||||
271 2025-09-13 06:50 32 *************
|
||||
272 2025-09-13 06:51 33 **************
|
||||
273 2025-09-13 06:52 33 **************
|
||||
274 2025-09-13 06:53 32 *************
|
||||
275 2025-09-13 06:54 33 **************
|
||||
276 2025-09-13 06:55 33 **************
|
||||
277 2025-09-13 06:56 33 **************
|
||||
278 2025-09-13 06:57 32 *************
|
||||
279 2025-09-13 06:58 33 **************
|
||||
280 2025-09-13 06:59 33 **************
|
||||
281 2025-09-13 07:00 32 *************
|
||||
282 2025-09-13 07:01 33 **************
|
||||
... ..( 12 skipped). .. **************
|
||||
295 2025-09-13 07:14 33 **************
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 3) ==
|
||||
0x01 0x008 4 37 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 23528 --- Power-on Hours
|
||||
0x01 0x018 6 92914363976 --- Logical Sectors Written
|
||||
0x01 0x020 6 1623476889 --- Number of Write Commands
|
||||
0x01 0x028 6 801635996557 --- Logical Sectors Read
|
||||
0x01 0x030 6 1165613946 --- Number of Read Commands
|
||||
0x01 0x038 6 84700800000 --- Date and Time TimeStamp
|
||||
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
||||
0x02 0x010 4 1 --- Overlimit Shock Events
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 683 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 682 --- Head Flying Hours
|
||||
0x03 0x018 4 40 --- Head Load Events
|
||||
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 61 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
|
||||
0x03 0x040 4 18 --- Number of High Priority Unload Events
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 33 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 35 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 42 --- Highest Temperature
|
||||
0x05 0x028 1 17 --- Lowest Temperature
|
||||
0x05 0x030 1 39 N-- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 21 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 36 N-- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 28 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 109 --- Number of Hardware Resets
|
||||
0x06 0x010 4 36 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c)
|
||||
No Defects Logged
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Loading…
Reference in New Issue