443 lines
22 KiB
Plaintext
Executable File
443 lines
22 KiB
Plaintext
Executable File
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p3 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
|
|
Device Model: TOSHIBA MG07ACA14TE
|
|
Serial Number: Y1W0A00WF94G
|
|
LU WWN Device Id: 5 000039 b48d8a112
|
|
Firmware Version: 0104
|
|
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ACS-3 T13/2161-D revision 5
|
|
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sun Oct 26 17:09:56 2025 CET
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x84) Offline data collection activity
|
|
was suspended by an interrupting command from host.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 113) The previous self-test completed having
|
|
the read element of the test failed.
|
|
Total time to complete Offline
|
|
data collection: ( 120) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: (1345) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate PO-R-- 100 085 050 - 0
|
|
2 Throughput_Performance P-S--- 100 100 050 - 0
|
|
3 Spin_Up_Time POS--K 100 100 001 - 7753
|
|
4 Start_Stop_Count -O--CK 100 100 000 - 34
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
|
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
|
9 Power_On_Hours -O--CK 039 039 000 - 24536
|
|
10 Spin_Retry_Count PO--CK 100 100 030 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 32
|
|
23 Helium_Condition_Lower PO---K 100 100 075 - 0
|
|
24 Helium_Condition_Upper PO---K 100 100 075 - 0
|
|
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 13
|
|
193 Load_Cycle_Count -O--CK 100 100 000 - 35
|
|
194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 17/41)
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|
197 Current_Pending_Sector -O--CK 100 100 000 - 328
|
|
198 Offline_Uncorrectable ----CK 100 100 000 - 63
|
|
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|
220 Disk_Shift -O---- 100 100 000 - 117440515
|
|
222 Loaded_Hours -O--CK 040 040 000 - 24358
|
|
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
|
224 Load_Friction -O---K 100 100 000 - 0
|
|
226 Load-in_Time -OS--K 100 100 000 - 596
|
|
240 Head_Flying_Hours P----- 100 100 001 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 51 Comprehensive SMART error log
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x08 GPL R/O 2 Power Conditions log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x0c GPL R/O 513 Pending Defects log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x24 GPL R/O 53248 Current Device Internal Status Data log
|
|
0x25 GPL R/O 53248 Saved Device Internal Status Data log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
Device Error Count: 10
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 10 [9] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 90 00 00 26 11 b7 b0 40 00 Error: WP at LBA = 0x2611b7b0 = 638695344
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
61 00 08 00 b8 00 03 d3 97 4c 08 40 00 22d+23:10:46.405 WRITE FPDMA QUEUED
|
|
61 00 08 00 b0 00 00 27 c6 5c b0 40 00 22d+23:10:46.405 WRITE FPDMA QUEUED
|
|
60 08 00 00 a8 00 00 83 1b 22 58 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
|
60 08 00 00 a0 00 00 83 1b 1a 58 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
|
60 00 08 00 98 00 02 7e a7 e6 c0 40 00 22d+23:10:46.405 READ FPDMA QUEUED
|
|
|
|
Error 9 [8] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
|
When the command that caused the error occurred, the device was in standby mode.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 38 00 00 26 11 b7 b0 40 00 Error: WP at LBA = 0x2611b7b0 = 638695344
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
61 00 08 00 78 00 00 27 c6 5c b0 40 00 22d+23:10:46.316 WRITE FPDMA QUEUED
|
|
60 08 00 00 70 00 00 83 1b 22 58 40 00 22d+23:10:43.020 READ FPDMA QUEUED
|
|
60 08 00 00 68 00 00 83 1b 1a 58 40 00 22d+23:10:43.016 READ FPDMA QUEUED
|
|
60 01 00 00 60 00 00 26 12 c7 98 40 00 22d+23:10:43.014 READ FPDMA QUEUED
|
|
60 00 08 00 58 00 02 7e a7 e6 c0 40 00 22d+23:10:42.653 READ FPDMA QUEUED
|
|
|
|
Error 8 [7] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
|
When the command that caused the error occurred, the device was in standby mode.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 e8 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 01 00 00 20 00 00 26 12 ae 98 40 00 22d+23:10:42.565 READ FPDMA QUEUED
|
|
60 01 00 00 18 00 00 26 12 61 98 40 00 22d+23:10:38.639 READ FPDMA QUEUED
|
|
60 01 00 00 10 00 00 26 12 4a 98 40 00 22d+23:10:38.635 READ FPDMA QUEUED
|
|
60 01 00 00 08 00 00 26 12 17 98 40 00 22d+23:10:38.237 READ FPDMA QUEUED
|
|
60 01 00 00 00 00 00 26 11 e5 98 40 00 22d+23:10:38.237 READ FPDMA QUEUED
|
|
|
|
Error 7 [6] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 50 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 01 00 00 d0 00 00 26 12 17 98 40 00 22d+23:10:34.650 READ FPDMA QUEUED
|
|
60 01 00 00 c8 00 00 26 11 e5 98 40 00 22d+23:10:34.645 READ FPDMA QUEUED
|
|
61 00 08 00 c0 00 00 27 c6 5c a8 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
|
61 00 b8 00 b8 00 00 00 0f 09 90 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
|
61 00 10 00 b0 00 03 d3 97 4b f8 40 00 22d+23:10:34.311 WRITE FPDMA QUEUED
|
|
|
|
Error 6 [5] occurred at disk power-on lifetime: 23041 hours (960 days + 1 hours)
|
|
When the command that caused the error occurred, the device was in standby mode.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 c8 00 00 26 11 b7 b0 40 00 Error: UNC at LBA = 0x2611b7b0 = 638695344
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 08 00 d8 00 00 12 d1 66 d0 40 00 22d+23:10:34.081 READ FPDMA QUEUED
|
|
60 01 00 00 d0 00 00 26 11 cd 98 40 00 22d+23:10:30.949 READ FPDMA QUEUED
|
|
60 01 00 00 c8 00 00 26 11 b7 98 40 00 22d+23:10:30.947 READ FPDMA QUEUED
|
|
60 01 00 00 c0 00 00 26 11 a1 98 40 00 22d+23:10:30.944 READ FPDMA QUEUED
|
|
60 01 00 00 b8 00 00 26 11 89 98 40 00 22d+23:10:30.939 READ FPDMA QUEUED
|
|
|
|
Error 5 [4] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 98 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 08 00 00 a8 00 00 04 01 d0 40 40 00 01:08:46.454 READ FPDMA QUEUED
|
|
60 07 f0 00 a0 00 00 04 01 c8 50 40 00 01:08:46.454 READ FPDMA QUEUED
|
|
60 08 00 00 98 00 00 04 01 c0 50 40 00 01:08:46.454 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:46.453 READ LOG EXT
|
|
60 08 00 00 88 00 00 04 01 d0 40 40 00 01:08:43.745 READ FPDMA QUEUED
|
|
|
|
Error 4 [3] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 78 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 08 00 00 88 00 00 04 01 d0 40 40 00 01:08:43.745 READ FPDMA QUEUED
|
|
60 07 f0 00 80 00 00 04 01 c8 50 40 00 01:08:43.745 READ FPDMA QUEUED
|
|
60 08 00 00 78 00 00 04 01 c0 50 40 00 01:08:43.745 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:43.744 READ LOG EXT
|
|
60 08 00 00 68 00 00 04 01 d0 40 40 00 01:08:40.910 READ FPDMA QUEUED
|
|
|
|
Error 3 [2] occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 58 00 00 04 01 c6 10 40 00 Error: UNC at LBA = 0x0401c610 = 67225104
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 08 00 00 68 00 00 04 01 d0 40 40 00 01:08:40.910 READ FPDMA QUEUED
|
|
60 07 f0 00 60 00 00 04 01 c8 50 40 00 01:08:40.910 READ FPDMA QUEUED
|
|
60 08 00 00 58 00 00 04 01 c0 50 40 00 01:08:40.910 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 00 01:08:40.910 READ LOG EXT
|
|
60 08 00 00 48 00 00 04 01 d0 40 40 00 01:08:38.196 READ FPDMA QUEUED
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Extended offline Completed: read failure 10% 24231 1189368
|
|
# 2 Extended offline Interrupted (host reset) 90% 24 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 1 (0x0001)
|
|
Device State: SMART Off-line Data Collection executing in background (4)
|
|
Current Temperature: 33 Celsius
|
|
Power Cycle Min/Max Temperature: 20/35 Celsius
|
|
Lifetime Min/Max Temperature: 17/41 Celsius
|
|
Specified Max Operating Temperature: 55 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 5/55 Celsius
|
|
Min/Max Temperature Limit: -40/70 Celsius
|
|
Temperature History Size (Index): 478 (36)
|
|
|
|
Index Estimated Time Temperature Celsius
|
|
37 2025-10-26 09:12 33 **************
|
|
... ..( 34 skipped). .. **************
|
|
72 2025-10-26 09:47 33 **************
|
|
73 2025-10-26 09:48 32 *************
|
|
... ..(141 skipped). .. *************
|
|
215 2025-10-26 12:10 32 *************
|
|
216 2025-10-26 12:11 31 ************
|
|
217 2025-10-26 12:12 32 *************
|
|
218 2025-10-26 12:13 31 ************
|
|
219 2025-10-26 12:14 31 ************
|
|
220 2025-10-26 12:15 31 ************
|
|
221 2025-10-26 12:16 32 *************
|
|
222 2025-10-26 12:17 32 *************
|
|
223 2025-10-26 12:18 31 ************
|
|
224 2025-10-26 12:19 32 *************
|
|
225 2025-10-26 12:20 31 ************
|
|
226 2025-10-26 12:21 32 *************
|
|
227 2025-10-26 12:22 31 ************
|
|
... ..( 2 skipped). .. ************
|
|
230 2025-10-26 12:25 31 ************
|
|
231 2025-10-26 12:26 32 *************
|
|
232 2025-10-26 12:27 31 ************
|
|
233 2025-10-26 12:28 32 *************
|
|
... ..(250 skipped). .. *************
|
|
6 2025-10-26 16:39 32 *************
|
|
7 2025-10-26 16:40 33 **************
|
|
... ..( 25 skipped). .. **************
|
|
33 2025-10-26 17:06 33 **************
|
|
34 2025-10-26 17:07 34 ***************
|
|
35 2025-10-26 17:08 33 **************
|
|
36 2025-10-26 17:09 33 **************
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 3) ==
|
|
0x01 0x008 4 32 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 24536 --- Power-on Hours
|
|
0x01 0x018 6 97186723072 --- Logical Sectors Written
|
|
0x01 0x020 6 1699162430 --- Number of Write Commands
|
|
0x01 0x028 6 828309603057 --- Logical Sectors Read
|
|
0x01 0x030 6 1176857596 --- Number of Read Commands
|
|
0x01 0x038 6 88329600000 --- Date and Time TimeStamp
|
|
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
|
0x02 0x010 4 0 --- Overlimit Shock Events
|
|
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|
0x03 0x008 4 498 --- Spindle Motor Power-on Hours
|
|
0x03 0x010 4 497 --- Head Flying Hours
|
|
0x03 0x018 4 35 --- Head Load Events
|
|
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
|
0x03 0x028 4 9784 --- Read Recovery Attempts
|
|
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
|
0x03 0x038 4 328 --- Number of Realloc. Candidate Logical Sectors
|
|
0x03 0x040 4 13 --- Number of High Priority Unload Events
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 33 --- Current Temperature
|
|
0x05 0x010 1 31 N-- Average Short Term Temperature
|
|
0x05 0x018 1 31 N-- Average Long Term Temperature
|
|
0x05 0x020 1 41 --- Highest Temperature
|
|
0x05 0x028 1 17 --- Lowest Temperature
|
|
0x05 0x030 1 38 N-- Highest Average Short Term Temperature
|
|
0x05 0x038 1 20 N-- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 35 N-- Highest Average Long Term Temperature
|
|
0x05 0x048 1 26 N-- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 0 --- Time in Over-Temperature
|
|
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 --- Time in Under-Temperature
|
|
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 106 --- Number of Hardware Resets
|
|
0x06 0x010 4 37 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c)
|
|
Index LBA Hours
|
|
0 770333432 24162
|
|
1 770333433 24162
|
|
2 770333434 24162
|
|
3 770333435 24162
|
|
4 770333436 24162
|
|
5 770333437 24162
|
|
6 770333438 24162
|
|
7 770333439 24162
|
|
8 770517336 24162
|
|
9 770517337 24162
|
|
10 770517338 24162
|
|
11 770517339 24162
|
|
12 770517340 24162
|
|
13 770517341 24162
|
|
14 770517342 24162
|
|
15 770517343 24162
|
|
16 802909400 24162
|
|
17 802909401 24162
|
|
18 802909402 24162
|
|
19 802909403 24162
|
|
20 802909404 24162
|
|
21 802909405 24162
|
|
22 802909406 24162
|
|
23 802909407 24162
|
|
24 802909408 24458
|
|
25 802909409 24458
|
|
26 802909410 24458
|
|
27 802909411 24458
|
|
28 802909412 24458
|
|
29 802909413 24458
|
|
30 802909414 24458
|
|
... (297 entries not shown)
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x0002 4 0 R_ERR response for data FIS
|
|
0x0003 4 0 R_ERR response for device-to-host data FIS
|
|
0x0004 4 0 R_ERR response for host-to-device data FIS
|
|
0x0005 4 0 R_ERR response for non-data FIS
|
|
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 4 0 Device-to-host non-data FIS retries
|
|
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 4 0 CRC errors within host-to-device FIS
|
|
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|