=20 =20

Bhyve VM Creation=C2=B6

Bhyve Initial Setup=C2=B6

Enable the tap interface in /etc/sysctl.conf and load it on= the currently running system

net.link.tap.up_on_open=3D=
1
sysctl -f /etc/sysctl.conf

Enable bhyve, serial console and bridge/tap interface kernel modules in = /boot/loader.conf. Reboot to apply changes or use kldload.

vmm_load=3D"YES"
nmdm_load=3D"YES"
if_bridge_load=3D"YES"
if_tap_load=3D"YES"

Set up the network interfaces in /etc/rc.conf

cloned_interfaces=3D"bridg=
e0 tap0"
ifconfig_bridge0=3D"addm re0 addm tap0"

Create a ZFS volume

zfs create -V16G -o volmod=
e=3Ddev zroot/testvm

Download the installation image

fetch ftp:/=
/ftp.freebsd.org/pub/FreeBSD/releases/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-=
amd64-disc1.iso=20

Start the VM

sh /usr/sha=
re/examples/bhyve/vmrun.sh -c 1 -m 512M -t tap0 -d /dev/zvol/zroot/testvm -=
i -I FreeBSD-11.1-RELEASE-amd64-disc1.iso testvm

Install as normal, following the menu options

New VM Creation Script=C2=B6

#! /bin/sh
read -p "Enter hostname: " hostname
zfs create -V16G -o volmode=3Ddev zroot/$hostname
sh /usr/share/examples/bhyve/vmrun.sh -c 1 -m 512M -t tap0 -d /dev/zvol/zro=
ot/$hostname -i -I ~/FreeBSD-11.1-RELEASE-amd64-disc1.iso $hostname

Creating a Linux guest=C2=B6

Create a file for the hard disk

truncate -s 16G linux.img

Create the file to map the virtual devices for kernel load

~/device.map

(hd0) /root/linux.img
(cd0) /root/linux.iso

Load the kernel

grub-bhyve -m ~/device.map=
 -r cd0 -M 1024M linuxguest

Grub should start, choose install as normal

Start the VM

bhyve -A -H=
 -P -s 0:0,hostbridge -s 1:0,lpc -s 2:0,virtio-net,tap0 -s 3:0,virtio-blk,/=
root/linux.img -l com1,/dev/nmdm0A -c 1 -m 512M linuxguest

Access through the serial console

cu -l /dev/nmdm0B

pfSense in a VM=C2=B6

Download the pfSense disk image from the website using fetch

fetch https=
://frafiles.pfsense.org/mirror/downloads/pfSense-CE-2.3.1-RELEASE-2g-amd64-=
nanobsd.img.gz -o ~/pfSense.img.gz

Create the storage

zfs create -V2G -o volmode=
=3Ddev zroot/pfsense

Unzip the file, and redirect output to the storage via dd

gzip -dc pfSense.img.gz | =
dd of=3D/dev/zvol/zroot/pfsense obs=3D64k

Load the kernel and start the boot process

bhyveload -c /dev/nmdm0A -=
d /dev/zvol/zroot/pfsense -m 256MB pfsense

Start the VM

/usr/sbin/b=
hyve -c 1 -m 256 -A -H -P -s 0:0,hostbridge -s 1:0,virtio-net,tap0 -s 3:0,a=
hci-hd,/dev/zvol/zroot/pfsense -s 4:1,lpc -l com1,/dev/nmdm0A pfsense

Connect to the VM via the serial connection with nmdm

cu -l /dev/nmdm0B

Perform initial configuration through the shell to assign the network in= terfaces

Once done, use the IP address to access through the web console

When finished, you can shutdown/reboot

To de-allocate the resources, you need to destroy the VM

bhyvectl --destroy --vm=3D=
pfsense

Multiple VMs using bhyve=C2=B6

To allow networking on multiple vms, there should be a tap assigned to e= ach vm, connected to the same bridge.

cloned_interfaces=3D"bridg=
e0 tap0 tap1 tap2"
ifconfig_bridge0=3D"addm re0 addm tap0 addm tap1 addm tap2"

Then when you provision vms, assign one of the tap interfaces to them.

vm-bhyve=C2=B6

A better way for managing a bhyve hypervisor.

Follow the instructions on the repo.

When adding the switch to a network interface, it doesn't work with re0.= tap1 works, but then internet doesnt work in the VMs. Needs sorting.

zfs

bsd-cloud-init should be tested, it sets hostname based on openstack ima= ge name.

otherwise, if we figure out how to make a template VM, you could set the= hostname as part of transferring over the rc.conf file

create template VM, start it, zfs send/recv?

=20